FULLY ELECTRIC
1739. The Patriot Full-Electric Homecare Bed
- Designed and engineered by the same team who develop the GF Long Term Care beds.
- Sleep surface is MADE IN THE USA!
- The single-motor design homecare bed is now available in a full-electric/low version.
- The Patriot Full-Electric Homecare Bed offers the same features as the Patriot Semi-Electric Homecare Bed with the additional feature of electric height adjustment.
- This makes it easier for caregivers to raise and lower the bed for patient care and linen changes.
- The electric height adjustment also enables the patient to easily position the bed for maximum comfort.
- The Full electric model can be adjusted to be a conventional height homecare bed OR a low bed for better inventory management!
- Total assembled bed weighs only 178 pounds (bed and motor).
- Powerful DC motor for effortless height adjustment.
- Hi-Lo motor comes pre-installed on foot section for easy set-up and disassembly.
- All functions fully-integrated into convenient handheld pendant.
- Welded motor-guard protects motor and universal joint from damage during shipment and deliveries.
- Available with Fiberboard Decorative Walnut Bed-ends or High-impact Plastic Bed-ends.
- Maximum patient weight 350 lbs.
- 450 lb evenly distributed total weight capacity including patient, mattress, rails, and accessories.
Height Adjustment:
- Casters in Low Position: Min. 9.5″, Max. 20″ (at deck level)
- Casters in Standard Position: Min. 13″, Max. 23.5″ (at deck level)
- Overall Bed Size: 87″ L x 36″ W.
- Lift Range: Head – 60°, Knee – 30°.
- No external pinch points!
- Slots in frame to ensure proper rail placement.
- Locking pins secure bed ends to sleep deck. Attached lanyards prevent loss while moving or storing.
- Only homecare bed to offer a 4-inch extension kit that can extend either the head, foot, or both head and foot decking. Bed length will be 84″ with one kit, 88″ with 2 kits.
- The only homecare bed to offer optional corner mattress retainers.
- Grid Deck offers the following advantages:
- Much stronger frame.
- Better mattress support.
- No spring sag or bottoming out with heavier patients.
- Easier to clean.
- No connecting links or springs to lose.
1740. Patriot LX Full-Electric Bed
- Robust steel grid deck sleep surface provides superior mattress support and easy to clean surface compared to traditional spring decks
- Head and foot sections can be raised or lowered simultaneously or independently with one hand control
- Recessed main frame offers maximum pinch point protection between grid deck and frame – reducing the risk of injury
- Lightweight design weighs only 126 lbs – lightest bed on the market
- Bed setup is so simple that it can save on setup time and requires minimal maintenance keeping your technicians time efficient
- Patent pending integrated HI/LO mechanism makes bed height adjustment easy and reduces potential loss of parts such as HI/LO rod when used as rentals
- Features dual HI/LO motors to adjust bed height from a low 10″ to 20″ easy and even allows for trendelenburg and slant positioning
- Patent pending rail slots in frame ensure quick and proper rail placement
- Single motor unit is designed for easy installation, requires less maintenance and provides the ultimate in quiet, smooth head and foot articulation
- Attractive, “home-like” thermo fused bed ends offer a less institutional look and eliminate a bed component that often requires frequent repair and maintenance
- Features SilverSolutions- an anti-microbial technology built into the paint that protects against bacteria and odor
- During a power failure, the motor can lower both the head and foot section with just a single 9 volt battery
- 4″ extension kit can be installed on head, foot or both to extend bed length to 84″ or 88″
- Proudly made in the U.S.A.
- Grid Deck offers the following advantages:
- Much stronger frame
- Better mattress support
- No spring sag or bottoming out with heavier patients
- Easier to clean
- No connecting links or springs to lose
- Technical Specifications
- Total bed weight assembled: 126 lb
- Maximum patient weight: 350 lbs EVENLY DISTRIBUTED, 450 lb distributed total weight capacity
- Including patient, mattress, rails and accessories
- Overall Bed Size: 84″ L x 35″ W (80″ x 35″ sleep surface)
- Lift Range: Head – 60, Knee – 30
- Bed Height: Min. 10″, Max. 20″ (at deck level)
Specifications:
- Total bed weight assembled: 126 lb
- Maximum patient weight 350 lbs EVENLY DISTRIBUTED
- 450 lb distributed total weight capacity including patient, mattress, rails and accessories
- Overall Bed Size: 84″ L x 35″ W (80″ x 35″ sleep surface)
- Lift Range: Head – 60, Knee – 30
- Bed Height: Min. 10″, Max. 20″ (at deck level)
1741. Delta Ultra-Light 1000 Full-Electric Low Bed
- The Delta 1000 is truly universal because the bed frame can be used with Drive’s and most other manufacturers’ bed ends, old and new
- The transition box mounted on the foot section is key to interchangeability
- The transition box allows you to change the rotation of the high/low shaft
- Headboard is taller than footboard to better fit home decor
- The wood grain panels are break and scratch resistant
- Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations
- Labels and color-coded springs assure accurate installation of side rails for patient safety
- Unique motor is completely self-contained to reduce weight and noise
- 9 ½” to 23 ½” deck height
- Easy to set up
- Top mounted Hi/Lo crank accessibility
- Height-adjustable motor comes pre-installed on the foot section
- Caster easily moves from standard to low bed position
- The motor assembly can be installed and removed with patient in bed
- Bed, side rails and mattress safety-tested by SGS, a nationally recognized testing facility Satisfies all applicable FDA entrapment guidelines
- The motor is UL approved
- In the event of a power failure, a 9 volt battery, located in the hand control, can lower the head and foot sections nine times
- New and improved hand pendant has large, easy-to-use controls
- Bed ships in two cartons
- Hand crank located on the top of the footboard prevents bending for the caregiver when in the low position
- Channel frame construction provides superior strength and reduced weight
- Zinc-coated spring deck
- Extension kit available extends length from 80″ to 84″
- Patent Pending
- Weight Capacity 450 lbs
- Bed Height Minimum Without Casters: 9.5″
- Bed Height Maximum With Casters: 23.5″
- Unit Dimensions: 36″ (W) x 88″ (L)
- Weight: 175 lbs.
1742. Delta Ultra-Light 1000, Full-Electric Bed
- The Delta 1000 is truly universal because the bed frame can be used with Drive’s and most other manufacturers’ bed ends, old and new
- The transition box mounted on the foot section is key to interchangeability
- The transition box allows you to change the rotation of the high/low shaft
- Headboard is taller than footboard to better fit home decor
- The wood grain panels are break and scratch resistant
- Foot section weighs 50% less than conventional foot sections to make deliveries safe and easy
- Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations
- Labels and color-coded springs assure accurate installation of side rails for patient safety
- Unique motor is completely self-contained to reduce weight and noise
- The motor assembly can be installed and removed with patient in bed
- Bed, side rails and mattress safety-tested by SGS, a nationally recognized testing facility Satisfies all applicable FDA entrapment guidelines
- The motor is UL approved
- In the event of a power failure, a 9 volt battery, located in the hand control, can lower the head and foot sections nine times No crank needed
- New and improved hand pendant has large, easy-to-use controls
- Bed ships in two cartons
- Channel frame construction provides superior strength and reduced weight
- Zinc-coated spring deck
- Extension kit available extends length from 80″ to 84″
- Patent Pending
- Weight Capacity 450 lbs
- Bed Height Minimum Without Casters: 12.75″
- Bed Height Maximum With Casters: 24″
- Unit Dimensions: 36″ (W) x 88″ (L)
- Weight: 169 lbs.
STANDARD MATTRESS
(More options under Pressure Bed Sore Care)
1743. Rolled Foam Mattress
- 80″ x 36″ x 6″
- Economical pressure redistribution mattress
- High quality foam mattress offers a high level of therapeutic comfort at an affordable price
- Ships rolled in carton to save on oversize freight charges
- Zippered, soft, flexible, and breathable nylon cover moves with the patient to reduce shear and is fluid-resistant, antimicrobial, anti-static and easy to clean
- Meets 16 CFR 1633 requirements
- 350 lb maximum weight capacity
1744. Reversible Combination Innerspring Mattress
- With ¾ ” Convoluted Foam Sleep Surface
- 80″ x 35″ x 7″
- Maximum Weight Capacity 350 lb – EVENLY DISTRIBUTED
- Vinyl cover is fluid resistant, anti-microbial, flame resistant, stain/tear resistant, anti-static, and hypo-allergenic
- Easy to maintain, comfortable
OTHER OPTIONS
1745. Full Length Rail
- The Full Length Rail is a nominal, telescoping full length rail that provides maximum length rail perimeter coverage, intended for use by patients requiring maximum length rail and maximum perimeter protection.
- Designed to offer added protection
Features:
- Improved rail design decreases the spacing between the crossbars, thus reducing the risk of entrapment
- New bed rail length closes open areas that can occur during full bed articulation
- Rails now mount in fixed patent pending rail slots on Patriot™ bed deck to prevent sliding and moving — easy installation saves delivery and setup time and ensures proper rail placement
- Spring-loaded, self-adjusting crossbraces feature safety tabs that prevent accidental disengagement when bumped or during application of side pressure
- Patriot Liberty Bed Rails have been tested to the highest Medical Bed System standards
- Designed to be used specifically with the Patriot and WhisperLite II full-electric beds that are commonly used as standard-height or low beds
- Heavy-duty steel construction
- Rails are powder-coated with an environmentally-friendly, long-lasting hammertone finish and secure gripping surface
- Tool-free installation
Specifications
- Overall length: 44 1/2″ (full extension – 62″)
- Overall height: 13.5″
- Product Weight: 21.5 lb
1747. Half No-Gap Head Rail
- The Half No-Gap Head Rail, which provides a full head coverage of 31.5 inches, extends to eliminate the gap between the head board and the end of the rail.
- The non-telescoping tube overlap results in a very sturdy rail that can be used as a secondary handle and support.
- Designed to offer added protection
Features:
- Improved rail design decreases the spacing between the crossbars, thus reducing the risk of entrapment
- New bed rail length closes open areas that can occur during full bed articulation
- Rails now mount in fixed patent pending rail slots on Patriot bed deck to prevent sliding and moving — easy installation saves delivery and setup time and ensures proper rail placement
- Spring-loaded, self-adjusting crossbraces feature safety tabs that prevent accidental disengagement when bumped or during application of side pressure
- Patriot Liberty Bed Rails have been tested to the highest Medical Bed System standards
- Designed to be used specifically with the Patriot and WhisperLite II full-electric beds that are commonly used as standard-height or low beds
- Heavy-duty steel construction
- Rails are powder-coated with an environmentally-friendly, long-lasting hammertone finish and secure gripping surface
- Tool-free installation
- The Half No Gap can be mounted on the bed’s head and the GF6580B-1 mounted on the bed’s foot to create the Patriot split rail system
Specifications:
- Overall length: (full extension) 31.5″
- Overall height: 17″
- Product Weight: 6.7 lb per bed rail
1748. Bed Extension Kit
- Extends standard length bed frame from 80″ to 84″.
- Complete with solid pan extension, mattress guard, and installation hardware.
- No additional spring length or fabric required.
- Works with all WhisperLite beds.
- Easy to install.
1750. Hospital Bed Set – Deluxe
- Our most complete bedding set!
- Includes flat and fitted cotton/poly hospital bed sheets; pillow case; vinyl zippered mattress protection
1751. Hospital Bed Set with Jersey Knit Fitted Sheet
- Includes flat & fitted jersey knit sheets
- Also includes pillow case
1752. Hospital Bed Sheets – Blend
- Contour sheet will fit all hospital mattresses
- White cotton/poly blend
1753. Contour Style Vinyl Mattress Protector-Hospital
- All home bed sizes available: Twin, Double, Queen, and King
- Contour style fits on bed like a bottom sheet to ensure maximum protection
- Made of heavy duty vinyl for less tears and leaks
- Hospital Bed Size – 36″ x 80″ x 6″
- High quality vinyl material
- Elasticized edges keep protector in place
1754. Twin
- 39″ x 75″ x 7.5″
1755. Full
- 54″ x 75″ x 7.5″
1756. Queen
- 60″ x 80″ x 7.5″
1757. King
- 78″ x 80″ x 7.5″
Vinyl Pillow Protectors
Zippered style for full protection
1758. Standard
- 21″ x 27″
1759. King
- 21″ x 37″
1760. Hospital Bed Set with Pillow Protector
- Includes flat and fitted cotton/poly hospital bed sheets; zippered vinyl pillow protector
1761. Zippered Style Hospital Size Vinyl Mattress Protectors
- High quality vinyl material
- Rust proof zipper
- Gives full mattress protection
- Hospital Bed Size – 36.5″ x 80.5″ x 6.5″